Hey Guys...
Ok.. I'm going to look into it...
What I will need from you Ratheads is Exact measurements for the CN and FN and I'll cost it out...
The measurements have to be taken from the inside where the pan will fit into.. When taking measurements,, keep in mind anything the would interfere with the pan sitting in there,,such as screws..
As far as the holes,, not a big deal at all...
I would simply cut out a round hole in the appropriate spot...
Depending on how this works I may even be able to add a tower/tunnel on the hole so the litter doesn't fall down ( just an idea right now)
If anyone is interested,, and this isn't meant to promote my site,, but more so that you can see exactly what is possible with today's plastics have a look here :
www.onscenetactical.com
As you can see the possibilities are endless...
The Trays will have folded sides, and the corners will be sealed with probably caulking or something like that.. ( Please let me know if you think that may be a problem...) Maybe they don't even need to be leak proof ???
All edges will be sanded so little ratties don't get hurt...
If anyone wants to contact me,, please drop me a note here:
[email protected]
Mods..
I apologize if this post goes against forum rules.. If it does I will Cease with this discussion..
Any problems,, feel free to contact me..
Eric
O/ST